IPR FAQs

Should I use interproximal reduction to correct tooth rotations?

No. Always rotate the teeth into the most ideal position. It is not recommended to use IPR for tooth rotations.

How do I decide when to perform more or less IPR than initially planned?

Adjusting the amount of IPR should be based on real-time assessments during treatment, taking into account the unique biological and anatomical characteristics of the patient’s teeth. Factors like natural enamel thickness (especially in incisors), patient-specific orthodontic responses, and overall dental health must be considered. Utilize intra-oral radiographs to evaluate enamel availability and make informed decisions about adjusting IPR levels.

What are the methods for accurately measuring the amount of IPR performed?

The amount of IPR can be measured using several techniques:

• IPR Gauges: Standard tools designed to measure the space created between teeth.
• IPR Strip Thickness: Using the known thickness of IPR strips (e.g., 0.1 mm) as a proxy for measurement. Doubling or tripling the strip folds increases the measured gap proportionally.
• Disc Width Measurement: Similar to strip thickness, the width of the cutting disc can also indicate the amount of enamel removed.

What should I do if I encounter issues like difficult angles, overlaps, or insufficient space during IPR?

For challenges such as difficult cutting angles, overlapping teeth, or inadequate space:

• Consider pre-aligning the teeth slightly to improve access to the intended surfaces.
• Perform IPR in multiple sessions to gradually achieve the desired reduction without risking damage to adjacent teeth.
• Use orthodontic techniques like slight proclination or separation before IPR if necessary.
• Avoid scheduling IPR for the first appointment; instead, allow some tooth mobility to develop through initial aligner use to facilitate easier and safer IPR.

How can I ensure a balanced reduction across interproximal surfaces?

To maintain uniform reduction and avoid creating uneven gaps:

• Always start with less invasive methods (e.g., hand strips) especially in tight contact areas to control the extent of reduction more precisely.
• Ensure the IPR instrument (strip or disc) is fully passed through the contact point.
• Apply the instrument evenly and carefully monitor the reduction process to maintain the natural contour of the teeth and avoid "V" shaped gaps.

If the space from IPR is still open despite adherence to the treatment plan, what should I do?

Continue with the planned treatment progression as sometimes the periodontal tissues may take time to remodel and close the gap. Regular monitoring is essential, and if the gap persists, consider using additional orthodontic interventions such as a power chain to close the space. You can also consider additional refinements (aligners).

What approaches should I consider if crowded teeth are difficult to move?

Consultation with an orthodontic specialist may be required to review and possibly adapt IPR techniques. Choosing the appropriate IPR strip (coarse, medium, fine) based on the specific situation can also make a significant difference in treatment outcomes.

How do I sculpt a natural-looking tooth contour rather than a flat surface after IPR?

Achieving a natural contour involves:

• Using a combination of different IPR techniques (e.g., diamond discs followed by hand strips) to smooth and round off edges effectively.
• Possibly adjusting the tooth alignment slightly before IPR to ensure that the correct surfaces are accessible and evenly reduced.

How can I reassure patients about the safety and necessity of IPR?

Educate patients about the natural processes of enamel wear and the conservative nature of IPR compared to daily enamel loss from chewing. Discuss the specific IPR techniques used and their safety profiles to alleviate concerns. If necessary, modify the IPR extent based on patient comfort and dental health status. You should never need aneasthetic to perform IPR.

 

When might it be appropriate to perform unscheduled IPR during treatment?

Unscheduled IPR might be necessary when routine alignment checks reveal persistent tight contacts that could derail treatment progress. Small, careful adjustments using hand stripping can help maintain the correct treatment trajectory.

Should the fit of the IPR gauge be tight or loose when checking created spaces?

The IPR gauge should fit loosely (passively) between the teeth. A tight fit can misleadingly compress the periodontal ligament, making it difficult to accurately assess the real space available for tooth movement.